Trigger-Wheels.com

Our universal crank sensor bracket can be adapted for use on most engines.  Adjustment slots allow for fine tuning sensor alignment whilst the large mounting face allows plenty of of flexibility for drilling to suit the mounting points on your engine

 Mounting bracket for a single 4-cylinder coilpack. Fits both 1st and 2nd gen coilpacks

 Mounting bracket for a single 4-cylinder coilpack suitable for fitting to vertical or near-vertical panels such as bulkheads or inner wings. Fits both 1st and 2nd gen coilpacks.  Please note coilpack pictured is not included.

 Mounting bracket for our 6-cylinder coilpacks. 

 Mounting bracket for a pair of 4-cylinder coilpack for V8 installations. Fits both 1st and 2nd gen coilpacks

Our adjustable crank sensor bracket for Rover V8 engines and can be adapted for use on many other engines.  Adjustment slots allow for fine tuning sensor alignment. 

Pre-serpentine bracket fits earlier V-belted engines, Serpentine bracket fits the later style engines with a single serpentine poly-vee belt, this bracket can also be used on pre-serpentine engines.

Crank sensor bracket for Austin/Rover/Mini A-series engines.  Mounts using the timing cover bolts and comes complete with spacer.

The EDIS modules have mounting holes ready to be mounted to a flat surface.  Sometimes though you don't have a convenient surface to mount them to.  We have come across these used EDIS-4 mounting brackets which can act as a heat-sink and help you to mount your module in difficult areas.

The steel is thin enough that it can be bent relatively easily to suit irregularly oriented mountings and can be welded/brazed if you need to add extensions.  Suitable for EDIS-4 and with a very small amount modification EDIS-6 modules too.

Please note that the EDIS module is shown in the pictures is for illustrative purposes only, you need to buy your EDIS module separately.